Skip to content
Frequency Generator

Dog Whistle Frequencies: Can a Phone Play Ultrasound?

A silent dog whistle seems almost like a trick: you blow, hear nothing, and the dog’s head turns. Phone apps and websites promise the same effect. They cannot quite deliver it, and the reason is worth knowing before you rely on one.

This page covers what dog whistle frequencies actually are, what dogs, cats and people can hear, why a phone cannot produce true ultrasound, and how whistles are really used in training.

Try Frequency Generator

Tone generation, sound tests, and musical tuning in one app.

Hearing ranges compared

Listener Approximate upper limit
Humans About 20 kHz when young, falling with age
Dogs Roughly 45 kHz
Cats Roughly 64 kHz, some measurements higher
Mice and rats Well into the ultrasonic range

These figures are approximate. A hearing limit depends on how loud the test sound is, and published numbers vary with the method used. What matters is the overall shape: dogs hear far above us, and cats higher still. At the other end, dogs do not hear quite as low as people do.

“Ultrasound” simply means sound above the range of human hearing, conventionally anything above 20 kHz. For how the human limit shifts with age, see hearing range by age.

What frequency is a dog whistle?

Traditional “silent” dog whistles are small metal whistles, often adjustable by screwing the barrel in or out. Most of their output lies above 20 kHz; adjustable models are commonly quoted at roughly 23 to 54 kHz. Many adults hear only a faint hiss of air or nothing at all, while younger people sometimes catch a thin tone at the lowest settings.

The design is old. The Victorian scientist Francis Galton used an adjustable high-pitched whistle to study the upper limit of hearing in people and animals, which is why you will sometimes see them called Galton whistles.

Plenty of working-dog handlers do not use silent whistles at all. Gundog and sheepdog whistles are usually plainly audible to people, which lets the handler hear exactly what signal they sent.

Why a phone or browser can’t produce ultrasound

Digital audio has a hard ceiling. A signal sampled at a given rate can only represent frequencies up to half that rate. Phones and browsers usually run at 44.1 kHz or 48 kHz, which caps output at about 22 kHz or 24 kHz, and the filters in the audio hardware typically cut off a little below that.

Then there is the speaker. A phone speaker is a few millimeters across, built for speech and music, and its output usually falls away steeply somewhere above 15 kHz. Some reach higher. None is designed to produce 30 or 40 kHz.

So a phone “dog whistle” is not playing in the 23 to 54 kHz range of a traditional silent whistle. It is playing a high but audible tone, somewhere between roughly 15 and 22 kHz. Dogs hear that range well. So do many children and teenagers, and some adults.

That does not make it useless. A dog can learn to respond to a 20 kHz tone just as it would to a silent whistle, and most adults will not notice it. Just do not assume nobody else can hear it, and do not expect it to carry the way a real whistle does. Near the top of its range, a phone speaker is quiet.

How whistles are actually used in training

A whistle has no built-in meaning to a dog. It does not call the dog because of its frequency. It works because the dog has learned that the sound predicts something worth coming for. Trainers like whistles because they:

  • sound the same every time, whoever blows them and whatever mood they are in, unlike a voice
  • carry over distance and through wind better than a shout
  • are distinctive, so the dog does not hear the cue by accident in everyday conversation

A typical recall setup pairs the whistle with a reward. Blow the whistle, give a high-value treat straight away, and repeat many times in easy situations close to the dog before trying it at a distance. Once the dog reliably turns toward the sound, the whistle has become a cue. Keep one distinct signal per command and use it consistently. This is general information; a qualified trainer can help with a specific dog.

A tone generator can serve as the cue in exactly the same way, as long as you use the same frequency every time. The dog whistle tone generator on this site plays a chosen frequency in your browser, and the high-frequency sound generator covers 8 to 22 kHz. Frequency Generator does the same on iPhone and Android, with decimal precision so you can return to exactly the same tone, and with PRO you can save it as a preset.

A note on using tones to deter animals

The other common use for “dog whistle” tones is to stop barking or to drive animals away. Be careful with this.

  • A sound that works by being unpleasant is an aversive. It can frighten a dog, and fear tends to make behavior problems harder to fix, not easier.
  • It does not teach anything. The tone does not show the dog what to do instead, and many dogs simply get used to it.
  • It reaches every animal in range, including pets in neighboring homes, cats, and pet rodents, which hear very high frequencies well.
  • People hear it too, especially children.

Please do not use high tones to distress animals, yours or anyone else’s. If barking or reactivity is a problem, a qualified trainer or a veterinary behaviorist is the right place to start.

Volume and safety

Keep the volume low. High frequencies are perceived as much quieter than they really are, so it is easy to play a tone loud enough to bother a dog, a child or yourself without realizing. A dog’s hearing is sensitive in exactly this range, so never play a tone loudly close to a dog’s head. Sustained high tones at high volume can also damage small speakers and tweeters, and loud sweeps through headphones are never a good idea.

Frequency Generator is a general tone generator, not a training device. Used quietly and consistently, a tone from it is a cue like any other whistle, and the training work is still what makes it mean something.

Get occasional updates

New features, tips, and the occasional announcement. No spam.

More from us