Skip to content
Frequency Generator

Hearing Range by Age: What's Normal at 20, 40 and 60

Human hearing is usually quoted as 20 Hz to 20,000 Hz. That figure describes a young person with undamaged ears in a quiet room. For almost everyone else, the bottom of the range stays roughly where it was and the top creeps down, a little at a time, from the late teens onward.

That is normal. Hearing range by age follows a predictable curve, and losing the highest frequencies first is something nearly everyone goes through, usually without noticing. This guide gives rough numbers for each decade, explains why the change rarely affects conversation at first, and shows how to check your own upper limit without fooling yourself or hurting your ears.

Try Frequency Generator

Tone generation, sound tests, and musical tuning in one app.

Typical upper limit of hearing by age

These are rough figures, not pass marks. Two healthy people of the same age can differ by a few kilohertz, and the result also depends on how loud the test tone is and what you play it through.

Age Highest tone often heard
Under 20 About 17–19 kHz
20s About 16–17 kHz
30s About 15–16 kHz
40s About 14–15 kHz
50s About 12–14 kHz
60 and over Often 8–12 kHz

The low end barely moves over a lifetime. If you could hear a deep 30 Hz rumble at 20, you will most likely still hear it at 70, as long as it is loud enough. At the bottom of the range, the equipment playing the sound is usually the limit, not your ears.

Some children hear a little above 20 kHz. Very few adults do, and most consumer audio cannot produce it cleanly anyway, so treat anything above 20 kHz as out of scope for a home check.

Why the top end goes first

Age-related hearing loss has a name: presbycusis. Sound enters the cochlea, the fluid-filled spiral of the inner ear, at its base. The hair cells that respond to the highest frequencies sit right there at the entrance, and they are the most easily worn out. Human hair cells do not grow back, so the losses add up year by year.

Several things feed into how fast it happens: ordinary aging, the total amount of loud sound you have heard, genetics, and some medical conditions and medicines. That is why two 45-year-olds can get noticeably different results.

Why speech is mostly unaffected at first

Speech is the reason most people never notice early high-frequency loss. Most of what you need to understand speech sits roughly between 250 Hz and 6 kHz. Vowels carry most of the loudness and sit in the lower part of that range. Consonants such as s, f, th and t are quieter and sit toward the top of it and above.

So losing everything above 14 kHz has no practical effect on conversation; there is very little speech information up there. The first sign that loss has reached the speech range is usually not “I can’t hear” but “I can hear, I just can’t make out the words”, especially in a noisy restaurant. Consonants go soft, and words like “fifty” and “sixty” start to blur.

Clinical hearing tests reflect this. A standard audiogram checks frequencies from 250 Hz to 8 kHz, because that is the range that matters for communication. A high-frequency check like the one below measures something else: the very top of your range, which is a good marker of age and noise exposure but says little about how well you follow a conversation.

Noise speeds the curve up

Loud sound causes the same kind of damage as age, only faster. Workplace guidance commonly treats 85 dB averaged over eight hours as the point where risk begins, and every 3 dB above that halves the safe time: about four hours at 88 dB, two hours at 91 dB, and minutes rather than hours at the levels common in clubs and at concerts.

Noise damage often shows up first around 4 kHz rather than at the very top, which is why audiologists look for a characteristic dip there on an audiogram. Ringing or muffled hearing after a loud night is a warning sign. It usually fades within a day or so, but repeated exposure adds up.

Why a phone speaker gives a false result

If you play a high-frequency test through a phone or laptop speaker, you are mostly testing the speaker. Small drivers fall away steeply above roughly 15 kHz, so the tone is simply not produced. You hear nothing at 17 kHz and conclude something about your ears that is really a fact about the hardware.

Headphones fix most of this. Wired headphones are the most predictable choice, and even inexpensive ones usually reach further than a built-in speaker. Two more traps:

  • Audio processing. Turn off EQ, “sound enhancement” or personalized hearing settings while you test. They change the level at the top end.
  • Chasing the tone with volume. High frequencies are perceived as much quieter than they really are. Near your limit, your threshold rises so steeply that turning the volume up buys you almost no extra range, and it is the main way people hurt themselves with these tests.

How to check your hearing range at home safely

  1. Use headphones in a quiet room, with EQ and enhancement features off.
  2. Set the level with a mid tone. Play a 1 kHz tone and set it to a quiet, comfortable level, about as loud as soft conversation. Do not touch the volume again during the test.
  3. Start high and come down. Play a tone above your expected limit, such as 18 or 19 kHz, then step down 500 Hz at a time, or use a slow downward sweep. Note the first frequency you can clearly hear.
  4. Check each ear. Play the tone in the left channel only, then the right. A small difference is common; a large one is worth mentioning to a professional.
  5. Repeat two or three times and take the typical result. Your first attempt is often the least accurate.

Stop if any tone feels uncomfortable, or if your ears ring afterward.

The free online hearing test on this site steps from 8 kHz up to 20 kHz and shows the age range each result usually matches. The high-frequency sound generator plays any tone from 8 to 22 kHz if you want to pin your limit down more precisely. Frequency Generator does the same on iPhone and Android, with decimal precision up to 22,000 Hz, left or right channel selection, and a sweep generator with adjustable start, end and duration.

For a familiar example of this curve in action, read about the mosquito tone, a sound near 17 kHz that most teenagers hear and most adults do not.

What a home check can’t tell you

A browser or app check tells you the highest tone you can hear through one pair of headphones at an uncalibrated volume. That is an interesting number, not a diagnosis. An audiogram, done by an audiologist with calibrated equipment in a quiet booth, measures the quietest sound you can hear at each frequency in each ear. That is what actually describes your hearing.

See a doctor or audiologist if:

  • you have trouble following speech, especially in background noise
  • one ear seems clearly worse than the other
  • you have ringing, buzzing or other sounds in your ears that do not go away
  • you have ear pain, discharge or dizziness
  • your hearing changes suddenly. Sudden hearing loss, especially in one ear, is treated as urgent, so get it checked the same day if you can.

Outside those situations, a drop at the very top of your range is simply the curve everyone follows. Frequency Generator is a convenient way to see where you are on it, and to check again in a few years.

Get occasional updates

New features, tips, and the occasional announcement. No spam.

More from us