Skip to content
Frequency Generator

What Is DTMF? Touch-Tone Frequencies Explained

Press a key during a phone call and you hear a short beep. That beep is DTMF, short for dual-tone multi-frequency signaling, and it is the reason you can type a PIN into a bank’s phone menu or skip to the next voicemail with a single key.

Each key is two tones played at once, one low and one high. The system was designed for the analog phone network, but it is still in use every day, and it is simple enough that you can generate the tones yourself and see exactly how it works.

Try Frequency Generator

Tone generation, sound tests, and musical tuning in one app.

The DTMF keypad frequencies

The keypad is a grid of four rows and four columns. Each row has its own low tone and each column its own high tone. Pressing a key sends its row tone and its column tone together.

Low / High 1209 Hz 1336 Hz 1477 Hz 1633 Hz
697 Hz 1 2 3 A
770 Hz 4 5 6 B
852 Hz 7 8 9 C
941 Hz * 0 # D

So the 5 key is 770 Hz plus 1336 Hz, and 0 is 941 Hz plus 1336 Hz. The international version of the standard is ITU-T Recommendation Q.23.

On an ordinary phone you only see the first three columns. The fourth column, A to D, is part of the standard but rarely appears on consumer keypads.

Why DTMF uses two tones

The tones travel down the same audio channel as your voice. That is called in-band signaling, and it creates an obvious problem: anything a person says, sings or plays into the phone could accidentally look like a digit. A system that used one tone per key would be triggered by whistling, or by a note in a piece of hold music.

Requiring exactly one tone from each group, at the same time and with nothing else strong alongside them, makes accidental triggering rare. Engineers call false triggering by speech “talk-off”, and the frequencies were chosen to make it unlikely:

  • No tone is a harmonic of another. Voices and instruments produce harmonics, extra tones at whole-number multiples of the note. Because no DTMF frequency is a multiple of another, a single sung note cannot supply a valid pair by itself.
  • Neighbors are about 10% apart. Adjacent frequencies in each group are spaced roughly 10% apart, enough for a receiver to tell them apart even on a poor line.
  • Receivers check more than frequency. A valid digit has to last long enough, the two tones need to be at broadly similar levels, and there should be little other sound competing with them. Speech rarely passes all of those tests at once.

A brief history of Touch-Tone

The Bell System in the United States introduced push-button “Touch-Tone” dialing to customers in 1963. Before that, phones used rotary dials, which signal digits by briefly interrupting the line. Those pulses work for setting up a call, but they cannot travel across the network once a call is connected. Tones can, because they are just sound.

That one property is what made automated phone systems possible. Once a caller could send digits in the middle of a call, a machine at the other end could ask questions and act on the answers.

The A to D keys had a specific use. On AUTOVON, the US military’s telephone network, they set the priority of a call, from routine up to “flash override”. Outside a few specialized systems, consumer phones simply left the fourth column off.

Where DTMF is used today

  • Phone menus. “Press 1 for billing” is DTMF, along with PINs, account numbers and conference call codes typed during a call.
  • Voicemail. Skipping, deleting and saving messages with keypad digits.
  • Radio control. Amateur radio operators use DTMF tones to control repeaters and linked systems, and many handheld radios have a keypad for sending them.
  • Door and gate intercoms. Many entry systems let you open the door by pressing a key on your phone while you are talking to the visitor.

Why tones in a recording still work

Because DTMF is just sound in the voice channel, the receiver cannot tell where it came from. Tones played from a speaker into a phone’s microphone, or from a recording, are as valid as tones from a keypad, as long as they arrive cleanly. Before smartphones, people carried small pocket tone dialers to hold against a handset so they could use phone menus from a rotary or public phone. A phone playing tones from Frequency Generator’s DTMF keypad works on the same principle.

There are limits:

  • Compression can damage tones. Some voice codecs used in mobile and internet calls are optimized for speech and can distort steady tones. Partly for that reason, internet phone systems usually send digits as separate signaling messages rather than as audio, and many phones do the same when you press a key on the dial pad. Tones played into the microphone may or may not get through, depending on how the call is carried.
  • Timing matters. Tones that are too short, or have too little gap between them, can be missed or merged. Most systems handle a tone of about a tenth of a second followed by a similar pause.
  • Level matters. If the signal clips, or one tone of the pair is much louder than the other, a receiver may reject it.

The other tones on a phone line

The other sounds you hear on a call are tone combinations too, though they are not DTMF. In North America, dial tone is 350 Hz plus 440 Hz, ringback is 440 Hz plus 480 Hz, and the busy signal is 480 Hz plus 620 Hz, switched on and off. Other countries use different tones; many European networks use a single 425 Hz tone for dial tone.

Generating DTMF tones yourself

Any DTMF digit is just two sine waves. Set one tone to the row frequency and another to the column frequency at equal level, play both together, and you have the digit. Building one by hand is a good way to see that there is nothing more to it.

The DTMF tone generator on this site plays the full 16-key pad, A to D included, in your browser. Frequency Generator has a DTMF keypad on iPhone and Android, and its multi-oscillator lets you build the pairs yourself if you want to hear what happens when a tone is slightly off frequency.

Keep the volume modest when you experiment. These tones sit in a range where hearing is sensitive, and a short beep at a sensible level is all any receiver needs.

Get occasional updates

New features, tips, and the occasional announcement. No spam.

More from us